Home
HVAC Protection
HVAC Refurbishment
Do-it-yourself
Air Sterilisation
Blygold Network
Become a Partner
References
Tender specification
Blygold History
HVAC Protection
 
 
 
 
 


Problem
 
Heat exchangers are subject to severe corrosion because of their construction, which usually combines dissimilar metals and because of the volume of polluted air passing through them.
 
Corrosion and pollution of heat exchangers
will directly affect the performance of the air conditioning system. The heat exchanger must be sealed off from the environment in a manner that will not reduce its heat transfer or cause a pressure drop. When this is accomplished, the cooling capacity will remain intact and energy consumption can be controlled.

 Why use Blygold PoluAl XT?
 
   • To control cooling capacity and energy consumption
   • To extend the lifetime of the heat exchanger
 
Solution
 
The Blygold PoluAl XT coating provides a long lasting corrosion protection to heat exchangers without affecting heat transfer and pressure drop. The total heat exchanging surface is protected from early deterioration. The system can be applied in the factory as well as on-site. The heat conductive pigmentation in the
coating is oriented in such a way that it creates
a very high chemical resistance at a low layer
thickness. In combination with the unique
application procedures of certified Blygold
applicators PoluAl XT is the best available
option to prevent air conditioning failure and
unnecessary energy consumption.

 
 
  
 
 
   

Technical information
Treatment:
Blygold PoluAl XT
Coating type:
Aluminum Pigmented Polyurethane
Color:
Champagne
Pretreatment:
Degreasing
Temperature Range (dry):
-20 to 150°C (-4 to 302°F)
Substrates:
Aluminum and Copper
ASTM B117:
4000+ hours (neutral-salt spray test)
ASTM B287:
4000+ hours (acid-salt spray test)
Kesternich (2.0 ltr SO2):
80 cycles
Layer Thickness:
25-30 μm (1 mil)
Pressure Drop:
0-5 % (depending on fin geometry)
Thermal Resistance:
0-3 % (depending on fin geometry)
Application:
Qualified Blygold Applicator
UV Resistance:
Excellent
Adhesion (cross hatch):
0 (European) 5b (USA)
Applications:
Heat exchanging surfaces in corrosive conditions
Chemical resistance
Excellent

 Leaflet PoluAl XT


Other Blygold products for corrosion protection of heat exchangers: